Mini Anchor Buddy Bungee 7' stretch to 21' for Jet Skis
Mini Anchor Buddy for PWC or Jet Ski
The Mini Anchor Buddy for PWC or jet ski is a bungee line for mooring your watercraft offshore away from a rocky beach or shoreline. The Anchor Buddy attaches to your own anchor. We sell excellent collapsible anchors that dont take up much space in your compartment. The only other line you need is the line that runs from your PWC to shore so that you can pull in your watercraft to shore when you are ready to go out for another ride.
-Prevents your jet ski from drifting away when the tide is incoming
-Protects your engine because you do not have to start your motor in shallow water
-Protects your hull from getting scratched by keeping it away from reefs, rocks, and sand
-The stretch bungee minimizes the action of waves prying loose your anchor when large wakes hit
-Conveniently allows you access your jet ski at any time without having to push it to shore, without having to pull up anchor, without having to swim out to it
-Anchoring your PWC offshore protects your equipment from thieves walking the shoreline
-Bungee stretch 7 to 21 ft-Available in Black, Red, Yellow, or Blue
How to use the Mini Anchor Buddy with your Jet Ski
The shallow water anchor buddy (or mini anchor buddy), is for PWC craft like wave runners and jet skis. The mini anchor buddy is used with a sand anchor, sand spike, or screw anchor to secure the bow line, and a Jet Logic Grapnel Folding Anchor for PWC for the lake anchor.
We suggest marking your anchor buddy system with a floating rope buoy so you can snap on, snap off all day without dropping your anchor each time. There is one company that sells buoys called the Anchor Bobber. You can buy one of those buoys, or configure your own out of a rope float.
|Use your anchor buddy with a buoy and snap hook to free up the work of dropping anchor each time you want to take your jet ski out for a ride. You will have more time enjoy the fun.|
An excellent choice for your PWC anchor is the Jet Logic Grapnel Folding Anchor for PWC also known as a collapsible grabbling anchor. A good jet ski anchor should be about 3 to 4 lbs depending on the size of your PWC.